Wed. Jun 12th, 2024


If you’re encountering the ‘antminer Socket Connect Failed’ error, you’re not alone. Many Antminer users have faced this issue while trying to connect their devices. In this article, we will guide you through the troubleshooting steps to resolve this error and get your Antminer up and running smoothly.

1. Check Network Connection

The first step is to ensure that your Antminer is properly connected to the network. Check the network cable, make sure it is securely plugged into the device and your router or switch. Additionally, verify that the network connection on your router or switch is active and operational.

2. Verify IP Configuration

Incorrect IP configuration can also cause the ‘Antminer Socket Connect Failed’ error. Make sure that the IP address assigned to your Antminer is correct and falls within the range of your local network. You can check the IP configuration in the Antminer web interface or by accessing your router’s admin panel.

3. Reset or Reboot the Antminer

Sometimes a simple reset or reboot can fix the ‘Antminer Socket Connect Failed’ error. Try turning off the device, disconnecting the power supply, waiting for a few minutes, and then reconnecting and restarting the Antminer. This procedure can help resolve any temporary glitches or connection issues.

4. Update Firmware

Outdated firmware can also lead to connection problems with your Antminer. Visit the official Antminer website to download the latest firmware version for your specific model. Follow the instructions provided by Antminer to update the firmware, ensuring that you carefully follow the steps to avoid any potential issues.

5. Firewall and Antivirus Software

Firewalls or antivirus software on your computer may interfere with the connection between your device and the Antminer. Temporarily disable any firewalls or antivirus programs, and then attempt to connect to your Antminer again. If the connection succeeds, you may need to configure your firewall or antivirus software to allow communication with the Antminer.

6. Contact Support

If you have tried all the above steps and are still experiencing the ‘Antminer Socket Connect Failed’ error, it is recommended to reach out to the Antminer support team for further assistance. Provide them with detailed information about your issue and steps you have already taken.


The ‘Antminer Socket Connect Failed’ error can be frustrating, but by following the troubleshooting steps mentioned in this article, you should be able to resolve the issue and establish a stable connection with your Antminer. Remember to check your network connection, verify the IP configuration, reset or reboot the device, update the firmware, and temporarily disable firewalls or antivirus software. If needed, don’t hesitate to seek help from Antminer support. Your mining operation will be up and running smoothly in no time.

By admin